WHEEL LOADER

HPU 95 - 100

Written by Rahmat Putra. Posted in Polyurethane (PUR)

Colour
red
 
Hardness shore A 95±2 SHORE ISO 868
Hardness shore D 48±3 SHORE ISO 868
Tensile strength ≥50 MPa DIN 53 504
Tear strength ≥110 kN/m DIN ISO 34-1
Spec. gravity 1200 kg/m³ ISO 1183
Abrasion 17 mm³ DIN 53 516
modulus 100% ≥15 MPa DIN 53 504
modulus 300% ≥28 MPa DIN 53 504
Elongation at break ≥350 % DIN 53 504
compression set 1 ≥27 % ISO 815
compression set 2 ≥33 % ISO 815
 
Min. service temperature -20
Max. service temperature 115
Tool abrasion   
Turnability
 

1 testing parameters 24h 70°C 25% Deflection
2 testing parameters 24h 100°C 25% Deflection 

 
 

H-PU 95 Shore A is a universally applicable sealing material which can be characterized by its wide service temperature range.

This hydrolysis resistant PU can be used where other PU’s get broken already much earlier. The machinability by turning, milling and grinding is excellent.

H-PU has very good values for tensile strength, elongation at break and tear strength. It also has a very low compression set.
Its excellent wear resistance, high elasticity, high dynamic resistance as well as low permeability are other advantages. Additionally it is FDA certified. This material is injection molded and also casted available.